Powder and Bulk Engineering
Wednesday, August 27, 2014
Skip Navigation LinksHome) Webinar 2013-07/16 How to Design or Modify Your
Powder and Bulk Engineering is a technical publication devoted to readers in the bulk solids market, worldwide.

How to Design or Modify Your Pneumatic Conveying System
to Meet Changing Plant Demands

Tuesday, July 16, 2013

Time:  12:00 PM (Noon) – 2:00 PM EDT

Presented by:  Jack Hilbert and Paul Solt

Moderated by:  Christine Bernier Lienke, Associate Editor of Powder and Bulk Engineering

Webinar Cost:  $99.00 USD

Registration fee is non-refundable after the live event.

Webinar Details:

Have you ever been faced with the situation where you have an existing pneumatic transfer system in your plant and it's been working fine, but all of a sudden you receive an email from the boss saying that ..."as part of our new product launch, we need to increase our transfer systems' capacity by 15 percent and — oh, by the way — those new silos we discussed will be located on the other side of the plant from where the existing silo bank is installed!"

This webinar will provide insight as to what options are available for modifying existing systems to handle new demands and production requirements.

The focus of the webinar will be on the most cost-effective solution, which may not necessarily be the lowest capital-cost solution.

Presenter Information:  Jack Hilbert, PE, is a consultant with Pneumatic Conveying Consultants and has more than 30 years experience in the application, design, engineering, installation, and operation of pneumatic conveying systems. He also has written numerous papers and given many presentations at technical conferences.

Paul Solt is principal consultant at Pneumatic Conveying Consultants in Allentown, Pa. Paul has been working in the field of pneumatic conveying for more than 50 years, and he has been writing his PBE column, “Pneumatic Points to Ponder...”, for nearly 20 years. He presents seminars on pneumatic conveying for the American Institute of Chemical Engineers, the Center for Professional Advancement in New Jersey, and other organizations. He also holds several patents for pneumatic conveying devices.

PDH Information:  If you are working on a certification or licensing program that allows Professional Development Hours, CSC Publishing Inc. will (upon request) provide a Certificate of Participation for our educational webinars put on by Powder and Bulk Engineering. One certificate per registered participate will be sent if the webinar is viewed. You should check with your employer or local agency to confirm their specific PDH requirements. In many cases, our educational webinars will contribute toward these hours.

Visit our sponsors:

      Copyright 2014, CSC Publishing Inc. ALL Rights Reserved * Privacy policy