rotator
Powder and Bulk Engineering
Saturday, August 30, 2014
Skip Navigation LinksHome) Webinar 2012-02/7 Combustible Dusts - Safe Cleanu
Powder and Bulk Engineering is a technical publication devoted to readers in the bulk solids market, worldwide.
 
Dust Collection: Combustible Dusts – Safe Cleanup Methods


Date:  
Tuesday, February 7, 2012

Time:  12:00 PM (Noon) – 2:00 PM EST

Presented by:  Gary Q. Johnson

Moderated by:  Robert Harkin, Associate Editor of Powder and Bulk Engineering

Webinar Cost:  $99.00 USD

Registration fee is non-refundable after the live event.



Webinar Details:  Accumulations of fugitive combustible dusts in the workplace could become a fuel source for a catastrophic dust explosion if suspended and ignited. Cleanup operations, if not done safely, can create dust explosion conditions during the very act intended to reduce risk in the workplace. There are several precautions to be taken to prevent a dust explosion during cleaning operations. This webinar will describe how to assess the magnitude of the dust layer hazard, list the hazards from cleaning operations, explain the considerations for hiring a contractor for major cleanup, and review the design principles for successful vacuum cleaning systems, the preferred method in NFPA standards. It will also provide an update on recent changes in NFPA standards (484, 654, 664) related to cleanup.

These topics will be addressed by the presenter, Gary Q. Johnson, an experienced dust control and combustible dust consultant.

Presenter Information:  Before becoming a consultant for Workplace Exposure Solutions, Gary worked in health, safety, and environment at Procter & Gamble for 27 years. His focus areas were dust control and central vacuum cleaning system design and maintenance, process safety around flammable vapors and combustible dusts, and environmental emissions and discharges. As a consultant over the last 9+ years, he has helped clients in consumer products, pharmaceuticals, plastics, paint and coatings, foods, flavorings, wood processing, specialty chemical, and metal forming industries.

PDH Information:  If you are working on a certification or licensing program that allows Professional Development Hours, CSC Publishing Inc. will (upon request) provide a Certificate of Participation for our educational webinars put on by Powder and Bulk Engineering. One certificate per registered participate will be sent if the webinar is viewed. You should check with your employer or local agency to confirm their specific PDH requirements. In many cases, our educational webinars will contribute toward these hours.


Visit our sponsors:









      Copyright 2014, CSC Publishing Inc. ALL Rights Reserved * Privacy policy